ZFlasher STM32 is a program for flashing STM32 microcontrollers.
Your device must have support USB Host (OTG), otherwise the program will not work.
Supported STM32 family:
* STM32F05x / F03x / F04x / F07x / F09x
* STM32F1 LD/MD/HD/XLD/CL/MD VL/HD VL
* STM32F2xx
* STM32F301x / F302x / F303x / F318xx / F328xx / F334xx / F398xx
* STM32F401 / F405 / F407 / F410 / F411 / F412 / F413 / F415 / F417 / F42x / F43 / F446 / F46x / F47x
* STM32F72 / F74x / F75x / F76xxx
* STM32L0x cat. 2 / cat. 5
* STM32L05x / L06x / L010 / L011 / L0x3
* STM32L100x / L15xx / L162x
* STM32L41x / L43x / L44x / L45x / L46x / L475xx / L476xx / L486xx / L496x / L4x1 / L4A6x / L4Rx
* STM32G030 / G031 / G041 / G070 / G071 / G081
* STM32G431 /G 441 / G471/ G473 / G474 / G483 / G484
* STM32H72x / H73x / H742 / H743 / H753 / H7A3 / H7B3
* STM32WBxx
Program work with:
* ST-LINK v3
* ST-LINK v2
* ST-LINK v2.1 (Nucleo Board)
* DFU Bootloader
ps I will be glad to comments and suggestions.
* Add support STLink V3;
* Add "Connect Under Reset" option;
* Add support H7 and G4 series;
* Rewrite HEX parser;
* Small fix.