MHD Flasher is the first Android handheld application to bring ECU tuning and monitoring to the BMW N55 engine for E series. The MHD Flasher reveals the good margin of power BMW left on the table with the N55 while still retaining the sophistication of the original engine management program.
→ Easy to install
Connect any compatible Android device to your car using a standard K+Dcan cable along with an OTG USB adapter, install one of the pre-purchased MHD maps and enjoy the power and performance benefits of the MHD maps by Twisted Tuning.
→ Keep an eye on the tuning
Monitor your engine behavior using a configurable gauges layout to keep an eye on any of the 50+ engine monitors like oil temp, boost pressure, actual load or individual cylinder ignition timing. Activate the logging mode to save up to 50 monitors to a standard CSV file for later analysis. Track issues by reading the error codes, and delete them once resolved.
→ Flash your ECU back to a stock anytime, as often as you need to. No ECU backup is needed.
→ Custom tuning support
As an alternative to built-in maps, many tuners can provide advanced custom mapping for those who have higher or special performance needs.
Main features description:
═══ Flasher module ═══
- Flash built-in maps (purchased separately), custom user-tuned .BIN files or JB4 flash maps.
- Provides an ever growing list of handy options like PPK exhaust burble duration or cold start noise reduction.
- Read / delete engine trouble codes.
- Reset the main DME adaptation values.
- 4 minutes map switching; initial install time: 33 mins (this will be improved later).
═══ Monitor module ═══
- Extensive logging values list, up to 50 values at the same time.
- Save logging session to .CSV files
- Integrated csv log viewer
- Up to 8 configurable gauges
═══ Optional MHD maps packs ═══
- Maps by Twisted tuning
- Stage 1 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants.
- Stage 2 pack. Eight maps: 4 fuel octane variants, stock / upgraded FMIC variants. High flow downpipes recommended.
- Ethanol mix map (e30). FMIC+DPs recommended.
Supported vehicles: N55 equipped Exx series.
2010-2013 135i, 135is and 335i
2013-2015 X1 35i
2010-2013 X5 35i
2011–2014 X6 35i
This racing product is for competition closed course use only.
Required hardware:
- 1 device running Android 3.2 and up, USB OTG compatible.
- 1 K+Dcan cable. See page 5 of the user manual for a recommended cable: http://www.twisted-visionz.com/mhdguide
- 1 USB OTG cable.
Price list (licenses are VIN Locked and stored by Google along your Play store account):
- Flasher module: $199
- MHD maps packs: $49 each. Requires the Flasher module.
- Monitor module: $69
FAQ
Q: Does my Android device need to be permanently plugged to the OBD port?
A: No. Once a flash is performed you can unplug your device.
Q: Do I lose my licenses if I delete the app or the Android device breaks?
A: No. licenses are stored online by Google, you can use your purchases on another device as long as you use the same account on Play store.
Q: Do I need to purchase a new license each time I flash a map?
A: No, you can ref lash as many times as needed.
Q: Is a battery charger required?
A: It is highly recommended for long flashes (install, uninstall). A healthy battery will handle short flashes (map changes) fine but the use of a battery charger remains recommended.
Q: How can I determine if the DME is directly flashable or needs a one time bench flash?
A: got to http://www.realoem.com/bmw/enUS/select and enter the last 7 digits of your VIN in serial number. Click Browse parts the ENGINE ELECTRICAL SYSTEM and check both CONTROL UNITS > MEVD1726 section. If the it says "No parts found matching your car." you have a MEVD172 which is directly flashable.
MHD Flasher เป็นแอพพลิเคชั่นมือถือ Android ตัวแรกที่นำการจูนและตรวจสอบ ECU ไปยังเครื่องยนต์ BMW N55 สำหรับ E series MHD Flasher เผยให้เห็นถึงพลังที่ดีของ BMW ที่เหลืออยู่บนโต๊ะพร้อมกับ N55 ในขณะที่ยังคงรักษาความซับซ้อนของโปรแกรมการจัดการเครื่องยนต์ดั้งเดิมไว้
→ติดตั้งง่าย
เชื่อมต่ออุปกรณ์ Android ใด ๆ ที่เข้ากันได้กับรถยนต์ของคุณโดยใช้สายเคเบิล K + Dcan มาตรฐานพร้อมกับอะแดปเตอร์ OTG USB ติดตั้งหนึ่งในแผนที่ MHD ที่ซื้อล่วงหน้าและเพลิดเพลินกับพลังและประสิทธิภาพการทำงานของแผนที่ MHD โดย Twisted Tuning
→จับตามองการจูน
ตรวจสอบพฤติกรรมเครื่องยนต์ของคุณโดยใช้รูปแบบเกจที่กำหนดค่าได้เพื่อคอยจับตาดูจอภาพ 50+ เครื่องยนต์เช่นอุณหภูมิน้ำมันเพิ่มแรงดันโหลดจริงหรือจังหวะการจุดระเบิดของกระบอกสูบแต่ละอัน เปิดใช้งานโหมดการบันทึกเพื่อบันทึกจอภาพ 50 ไฟล์ไปยังไฟล์ CSV มาตรฐานเพื่อการวิเคราะห์ในภายหลัง ติดตามปัญหาด้วยการอ่านรหัสข้อผิดพลาดและลบเมื่อแก้ไขได้
→นำ ECU ของคุณกลับไปที่หุ้นได้ตลอดเวลาบ่อยเท่าที่คุณต้องการ ไม่จำเป็นต้องสำรองข้อมูล ECU
→ปรับแต่งการสนับสนุน
ในฐานะที่เป็นทางเลือกแทนแผนที่ในตัวเครื่องรับจำนวนมากสามารถให้บริการการทำแผนที่ขั้นสูงสำหรับผู้ที่มีความต้องการประสิทธิภาพสูงหรือพิเศษ
คำอธิบายคุณสมบัติหลัก:
module โมดูลไฟกะพริบ═══
- แผนที่แฟลชในตัว (ซื้อแยกต่างหาก) ไฟล์. BIN ที่ผู้ใช้ปรับแต่งเองหรือแผนที่แฟลช JB4
- มีรายการตัวเลือกที่มีประโยชน์เพิ่มขึ้นเรื่อย ๆ เช่นระยะเวลาไอเสียของ PPK หรือการลดเสียงรบกวนในช่วงเย็น
- อ่าน / ลบรหัสปัญหาเครื่องยนต์
- รีเซ็ตค่าการปรับ DME หลัก
- การสลับแผนที่ 4 นาที; เวลาติดตั้งเริ่มต้น: 33 นาที (จะปรับปรุงในภายหลัง)
═══มอนิเตอร์โมดูล═══
- รายการค่าบันทึกที่ครอบคลุมมากถึง 50 ค่าในเวลาเดียวกัน
- บันทึกเซสชันการบันทึกลงในไฟล์. CSV
- โปรแกรมดูบันทึก csv ในตัว
- มาตรวัดที่กำหนดค่าได้สูงสุด 8 ตัว
packs แพ็คแผนที่ MHD ที่เป็นตัวเลือก═══
- Maps โดยการปรับจูน
- ด่าน 1 แพ็ค แผนที่แปด: 4 ตัวแปรออกเทนน้ำมันเชื้อเพลิง, หุ้น / ตัวแปร FMIC ที่ได้รับการอัพเกรด
- ด่าน 2 แพ็ค แผนที่แปด: 4 ตัวแปรออกเทนน้ำมันเชื้อเพลิง, หุ้น / ตัวแปร FMIC ที่ได้รับการอัพเกรด ขอแนะนำให้ใช้เครื่องมือดาวน์ไหลสูง
- แผนที่ผสมเอทานอล (e30) แนะนำ FMIC + DPs
ยานพาหนะที่รองรับ: N55 ซีรี่ส์ Exx ที่ติดตั้ง
2553-2556 135i, 135is และ 335i
2013-2015 X1 35i
2553-2556 X5 35i
2554-2557 X6 35i
ผลิตภัณฑ์สำหรับการแข่งขันนี้ใช้สำหรับการแข่งขันนอกหลักสูตรเท่านั้น
ฮาร์ดแวร์ที่ต้องการ:
- อุปกรณ์ 1 เครื่องที่ใช้ Android 3.2 ขึ้นไปรองรับ USB OTG
- สายเคเบิล 1 K + Dcan ดูหน้า 5 ของคู่มือผู้ใช้สำหรับสายเคเบิลที่แนะนำ: http://www.twisted-visionz.com/mhdguide
- สาย USB OTG 1 เส้น
รายการราคา (ใบอนุญาต VIN ถูกล็อคและจัดเก็บโดย Google ตามบัญชี Play store ของคุณ):
- โมดูล Flasher: $ 199
- แพ็คแผนที่ MHD: $ 49 ต่อคน ต้องการโมดูล Flasher
- โมดูลการตรวจสอบ: $ 69
คำถามที่พบบ่อย
ถาม: อุปกรณ์ Android ของฉันต้องเสียบกับพอร์ต OBD อย่างถาวรหรือไม่
ตอบ: ไม่เมื่อแฟลชเสร็จแล้วคุณสามารถถอดปลั๊กอุปกรณ์ออกได้
ถาม: ฉันจะสูญเสียสิทธิ์การใช้งานของฉันหรือไม่หากฉันลบแอพหรืออุปกรณ์ Android แตก?
ตอบ: ไม่ได้มีการจัดเก็บสิทธิ์การใช้งานแบบออนไลน์โดย Google คุณสามารถใช้การซื้อของคุณกับอุปกรณ์อื่นได้ตราบใดที่คุณใช้บัญชีเดียวกันกับ Play store
ถาม: ฉันจำเป็นต้องซื้อใบอนุญาตใหม่ทุกครั้งที่ฉันแฟลชแผนที่หรือไม่
ตอบ: ไม่คุณสามารถอ้างอิงหลายครั้งได้ตามต้องการ
ถาม: จำเป็นต้องมีเครื่องชาร์จแบตเตอรี่หรือไม่?
ตอบ: ขอแนะนำอย่างยิ่งสำหรับการกะพริบยาว (ติดตั้งถอนการติดตั้ง) แบตเตอรี่ที่แข็งแรงจะจัดการกับไฟกะพริบสั้น ๆ (เปลี่ยนแผนที่) ได้ดี แต่ยังแนะนำให้ใช้เครื่องชาร์จแบตเตอรี่
ถาม: ฉันจะทราบได้อย่างไรว่า DME สามารถใช้งานได้โดยตรงหรือต้องการแฟลชในตัวเครื่อง?
ตอบ: ได้ไปที่ http://www.realoem.com/bmw/enUS/select และป้อน 7 หลักสุดท้ายของ VIN ของคุณในหมายเลขซีเรียล คลิกเรียกดูส่วนต่าง ๆ ของ ENGINE ELECTRICAL SYSTEM และตรวจสอบทั้งชุดควบคุม> MEVD1726 ส่วน ถ้ามีข้อความว่า "ไม่พบชิ้นส่วนที่ตรงกับรถของคุณ" คุณมี MEVD172 ซึ่งสามารถแฟลชได้โดยตรง
1.57
- Added XDi pumps support for late E series as flash option.
- Added an e50 maps for N55s with the N54 hpfp (models till 3-2012)
- All maps updated to 1.54 (Valvetronic changes for better idle, part throttle and transient boost response)